Need a Price? Contact Us

The ATEX hand control is an intrinsically safe rugged and versatile digital handheld display with a broad range of features and is suitable for all Straightpoint ATEX/IECEx load cell products. With the option to read up to four SP Ex load cells simultaneously allowing the operator to monitor a multi-pick point lift from a single handheld.

With a range of 500m or 1640ft enables the user to measure loads from a safe distance in hazardous areas zones 0,1 & 2, such as offshore oil rigs and petrochemical plants

At the heart of the ergonomically designed ATEX Handheld plus is a powerful PCB providing industry-leading features such as user selectable units of measure (tonnes, lbs, kg and kN), peak hold, pre-set tare and an on-screen overload warning and loadcell calibration due warning.
Certification
SW-HHP ATEX
IECEx SIR 15.0072X / Sira 15ATEX2196X

• About
• Specifications/Technical Data
• Downloads

• About
• Specifications/Technical Data
• Downloads

About

FEATURES 

• Larger Multiline Screen
• Read up to 4 SP Loadcells simultaneously
• Multiple display units – tonnes, lbs, kg and kN
• On-screen Overload warning
• Loadcell Calibration due warning
• 100Hz Peak hold
• Pre-set tare
• Unrivalled Wireless range 500m/1640ft

ATEX Handheld plus are paired with the following Straightpoint ATEX/IECEx products:

• ATEX Radiolink Plus
• ATEX Wireless Load Shackle
• ATEX Wireless Compression
• ATEX TIMH
• ATEX Loadpin

 

WARRANTY & ASSURANCE

• 2 year warranty

SUPPLIED WITH THE FOLLOWING AS STANDARD

• 2XAA Energizer L91
• Operator Manual

 

 

Specifications/Technical Data

Part Number	SW-HHP-ATEX
Battery Type	4 x Energizer® Ultimate Lithium AA Batteries
Battery Life	40 hrs continuous
Display Type	240x128 Multiline dot matrix
Operating Temp	-20 to +70 °C / -4 to 158 ˚F
Display Rate	3Hz
Protection	IP65 or NEMA 4X
Excitation	N/A
Max Sensitivity	N/A
Max resolution	1:999999 (normal mode)
Range	500 meters
	1640 feet
Approval Spec	Ex ia II C T4 Ga for use in zone 2, 1 & 0 - certificate number IECEx SIR 15.0072X & SIRA 15ATEX2196X
Connectivity	Wireless 2.4 GHz

SAFETY REMINDER
To all users of Crosby Straightpoint ATEX/UKEX/IECeX products:
Please ensure that only intrinsically safe batteries, certified for use in hazardous areas, are fitted.
(It is suggested that this is verified as part of pre-use equipment checks.)
We recommend using Energizer L91 Ultimate Lithium AA batteries, rated for use in Zone 0,1,2, and Class 1, Division 1.

Downloads

Straightpoint’s expanded range of ATEX products conforms with a new directive—2014/34/EU—that becomes effective today (20 April 2016), updating 94/9/EC.
At the turn of the year, the force measurement, load monitoring and suspended weighing load cell equipment manufacturer launched an ATEX and IECEx version of its most popular product, the Radiolink Plus wireless load cell, which met Zone 0, 1 and 2 hazardous area classification.
An ATEX version of the wireless Handheld Plus followed, while other wireless products including compression cells, shackle cells, load pins and the Running Line Dynamometer (or TIMH), part of the manufacturer’s tension in motion range, are also in accordance with the 2014/34/EU directive and boast classification in the three-zone, including 0 (an area in which an explosive gas atmosphere is present continuously or for long periods)—unprecedented in wireless below-the-hook force measurement technology.

Need a price? Contact our team 

The criteria of ATEX and IECEx are broadly similar, although the former is widely accepted throughout Europe, while the latter is required in many other global markets.
The ATEX version of the load cell and the wireless handheld unit contains several safety components that permit its use in Zone 0 environments. A separate storage area has been created at Straightpoint’s Havant, UK headquarters and all production personnel have been specially trained in the assembly of the explosion-proof units.


EX load cell products available
Radiolink plus | Wireless Loadpin | Wireless Compression | Wireless Shackle | Running Line Tensiometer

Applications
On and offshore oil and gas, chemical and other industries with challenging hazardous areas.

Need a price? Contact our team

Available ATEX and IECEx approved to Ex ia II T4 Ga for use in zones 0, 1 and 2 hazardous environments (gas) and is designed for the on and offshore oil and gas, chemical and other industries with challenging hazardous areas

The Straightpoint hazardous area range of Load Measurement Pins (LMP’s) are designed for use in applications where an end of line load cell cannot be used an integrated solution is required.

Often a customised solution they are manufactured from high tensile stainless steel and are normally supplied complete with an anti-rotation plate as a wireless solution with a range of up to 500m or 1640 feet.
Load data is transmitted wirelessly utilising the latest in IEEE 802.15.4 (2.4 GHz) technology providing safe, high integrity, error-free transmission of both static weight and dynamic load to our SW-HHP-ATEX handheld controller for use in hazardous areas.

This latest range of Loadpins utilise easily sourced Energizer® Ultimate Lithium AA Batteries and features advanced circuitry designed to protect the unit from damage associated with incorrectly installed batteries. This advanced circuitry extends battery life eliminates issues associated with rechargeable battery pack charging, failure and replacement.

Note: Please advise cable configuration on order - Radial or Axial Pin exit. ATEX is only available as a wireless option. If you require an ATEX Wireless Load pin to a particular size and design, download our Load pin Questionnaire and return POA.

Typical displacement of a loadpin under full load is around 0.04mm:	The typical lifespan of a 1mv/v loadpin is more than 10 billion cycles:

• General Description
• Typical Locations
• Locking Systems
• Cable & Connector Arrangements
• Specifications/Technical Data
• Downloads

• General Description
• Typical Locations
• Locking Systems
• Cable & Connector Arrangements
• Specifications/Technical Data
• Downloads

General Description

Loadpin General Description
A load measuring pin senses the force applied across it, via strain gauges installed within a small bore through the centre of the pin. Two grooves are machined into the outer circumference of the pin to define the shear planes, which are located between the forces being measured.

 

     

 

 

 

 

 

Load Pin Environmental Protection
As the instrumented area of the load pin is totally contained within a small central bore, the load pin sensor is inherently waterproof. Manufactured from special stainless steels, fitted with welded or `O' ring sealed end caps and with special attention to the signal cable glanding, a very high operating reliability can be guaranteed even for load pins operating underwater.

Typical Locations

Loadpin Typical Locations
If a pin exists within a defined load path or can be fitted to experience a force, then a Straightpoint Load Pin can be installed to monitor that load. The sketches below show typical locations for load pins. 

Locking Systems

Loadpin Locking Systems
A load-measuring pin needs to be securely locked into position to fix its orientation for its associated assembly. This needs to be fixed, both in the axial and rotation modes, to ensure that accurate and repeatable results are obtained from the system.

A standard load pin is designed to sense the force in one direction only. A force at right angles to that force will produce a zero output from the sensor.

Cable & Connector Arrangements

Loadpin Cable & Connector Arrangements
The signal cable can normally exit from the load pin to suit the installation and space requirements. Emphasis should be placed on the protection of the cabling system from accidental damage during installation and use. A plug and socket breakdown can be incorporated at the load pin if required. Extra protection can be provided over the standard polyurethane sheathed cable in the form of hydraulic hose. This provides excellent protection with the advantage of associated fittings being readily available.

Requires connection to Straightpoint’s Handheld plus (HHP), Desktop Controller data logging software (DCP10M) or External Amplifier range (SA-3420) that can be configured to provide outputs such as 4-20mA, 0-10v, 0-5v for PLC or data logger integration.

Please note if you require a Loadpin to a particular size and design download our loadpin questionnaire and return POA

Loadpin specifications

Specifications/Technical Data

	Ex battery type: Ex Handheld 2 x Energizer® Ultimate Lithium AA Batteries Loadcell 4 x Energizer® Ultimate Lithium AA Batteries SAFETY REMINDER To all users of Crosby Straightpoint ATEX/UKEX/IECeX products: Please ensure that only intrinsically safe batteries, certified for use in hazardous areas, are fitted. (It is suggested that this is verified as part of pre-use equipment checks.) We recommend using Energizer L91 Ultimate Lithium AA batteries, rated for use in Zone 0,1,2, and Class 1, Division 1.
	Wireless Approvals Federal Communications Commission     FCC: W70MRF24J40MDME Industry Canada     IC: 7693A-24J40MDME Japan Certification     ID: 204-52-1

Loadpin specifications

Part number	LP500KG-ATEX	LP1T-ATEX	LP2.5T-ATEX	LP3.5T-ATEX	LP6.5T-ATEX	LP15T-ATEX	LP25T-ATEX	LP50T-ATEX	LP100T-ATEX	LP250T-ATEX	LP500T-ATEX	LP750T-ATEX	LP1000T-ATEX	LP1500T-ATEX
Capacity	500kg	1000kg	2.5te	3.5te	6.5te	15te	25te	50te	100te	250te	500te	750te	1000te	1500te
	1100lbs	2200lbs	5500lbs	7700lbs	14,000lbs	33,000lbs	55,000lbs	110,000lbs	220,000lbs	550,000lbs	110,0000lbs	165,0000lbs	220,0000lbs	330,0000lbs
Resolution	0.2kg	0.5kg	0.001te	0.001te	0.002te	0.002te	0.005te	0.01te	0.05te	0.1te	0.2te	0.2te	0.5te	0.5te
	0.5lb	1lb	2lb	2lb	5lb	5lb	10lb	20lb	100lb	200lb	500lb	500lb	1000lb	1000lb
Weight	1.9kg	2kg	2.2kg	2.4kg	3kg	4.1kg	6.6kg	9.6kg	12.8kg	30.8kg	80.2kg	147kg	276kg	390kg
	4.2lb	4.4lb	4.85lb	5.3lb	6.6lb	9lb	14.6lb	21.2lb	28.2lb	67.9lb	176.8lb	324lb	608.5lb	859.8lb
Units	kgs,tonnes
Protection	IP67 (IP68 available as an option)
Safety Factor	300% of SWL
Op Temp	-20 to +70 °C
	-4 to 158˚F
Range	Wireless version 500m
	Wireless version 1640 ft
Accuracy	+/-1% FS
Dim A	24	35	45	50	63	75	89	102	110	130	225	295	360	430
	0.94	1.38	1.77	1.97	2.48	2.95	3.50	4.02	4.33	5.12	8.86	11.61	14.17	16.93
Dim B	36	49	70	75	95	114	152	178	190	220	370	500	612	731
	1.42	1.93	2.76	2.95	3.74	4.49	5.98	7.01	7.48	8.66	14.57	19.69	24.09	28.78
Dim C	70	80	100	105	125	150	195	225	230	300	440	590	712	832
	2.76	3.15	3.94	4.13	4.92	5.91	7.68	8.86	9.06	11.81	17.32	23.23	28.03	32.76
Dim ØD	20	20	25	30	40	50	63	75	88	125	170	200	250	275
	0.79	0.79	0.98	1.18	1.57	1.97	2.48	2.95	3.46	4.92	6.69	7.87	9.84	10.83

Downloads